• Shake/ Stir well before use.
• Provide a clean degreased wood surface sanded 150 grit.
• First Coat: Brush evenly and allow for 12-24 hours of drying time depending on wood specie and climatic conditions.
• Excess atmospheric humidity or low temperatures can prolong drying time.
• Natural oil content present in timbers such as Ipe, Iroko etc. can prolong drying time.
• Second Coat: Brush evenly and allow for 12-24 hours of drying time depending on wood specie and climatic conditions.

• For regular cleaning of the wood surface treated with oils; use nuetral Ph value water borne wood cleaning soaps for mopping.
• Recoating with original oils is recommended annually. ( To be done by professional contractors )
• Periodic recoating grants high abrasion & stain resistance to the treated surface.

• Shake/ stir well before use.
• Keep out of reach of children.
• Repeated exposure may cause skin dryness or cracking.
• Cloth, Rags, Sanding papers, Buffing Pads used along with these products should be soaked in water and then discarded. Unattended waste can cause self-ignition.

The product comes in 1litre/ 10 litre/ 20 litre Cans.

Keep in cool, well ventilated place. When not in use, keep the container closed. Provide safe distance from flames, sparks and other sources of ignition.

Our technical data sheets are formulated based on our laboratory tests. Application instructions and technical advice is suggestive. Applicator skills, base veneer/ wood specie, working environments, equipment used, dilutions etc. form integral parts of the final result achieved on the coated surface. The cumulative effect of various permutations and combinations of these factors are difficult to predict. Thus we highly recommend that the User/ Installer/ Specifier/ Final Consumer must test the products for suitability and results in their specific environment. We can always assure the consistency of the physical and chemical characteristics of the material supplied.