Have an account? Enter Email ID and Password to access your account.

New User? Register Now

Forgot your password?

No worries! Enter your email and we will send you a reset link.

Sign Up

Already have an account? Sign In

Physical & Chemical Properties
  • Appearance :
  • Density :
    860 grams/ litre
  • Solid Content :
  • Odour :
  • Yield :
    225-250 Square Feet (Brush) on single coat basis depending on veneer/ wood specie.
  • Dilution :
    Not Required
  • Cleaning of Tools :
    White Spirit
  • Application :
  • Number of Coats :
    2 coats
  • Gloss Level :
    Deep Matt (5%)
How to Use
  • Shake/ Stir well before use.
  • Provide a clean degreased wood surface sanded 150 grit.
  • First Coat: Brush evenly and allow for 12-24 hours of drying time depending on wood specie and climatic conditions.
  • Excess atmospheric humidity or low temperatures can prolong drying time.
  • Natural oil content present in timbers such as Ipe, Iroko etc. can prolong drying time.
  • Second Coat: Brush evenly and allow for 12-24 hours of drying time depending on wood specie and climatic conditions.
Cleaning And Maintenance Recommendation
Important Note : All cleaning and maintenance jobs can be done by domestic help/ servants.
  • For regular cleaning of the wood surface treated with oils; use nuetral Ph value water borne wood cleaning soaps for mopping.
  • Recoating with original oils is recommended annually. ( To be done by professional contractors )
  • Periodic recoating grants high abrasion & stain resistance to the treated surface.
General Instructions
  • Shake/ stir well before use.
  • Keep out of reach of children.
  • Repeated exposure may cause skin dryness or cracking.
  • Cloth, Rags, Sanding papers, Buffing Pads used along with these products should be soaked in water and then discarded. Unattended waste can cause self-ignition.

The product comes in 1litre/ 10 litre/ 20 litre Cans.


Keep in cool, well ventilated place. When not in use, keep the container closed. Provide safe distance from flames, sparks and other sources of ignition.


Our technical data sheets formulated based on our laboratory tests. Application instructions and technical advice is suggestive. Applicator skills, base veneer/ wood specie, working environments, equipment used, dilutions form integral parts of the final result achieved on the coated surface. The cumulative effect of various permutations and combinations of these factors are difficult to predict. Thus we highly recommend that the user/ specifier/ final consumer must test the products for suitability and results in their specific environment. We can always assure the consistency of the physical and chemical characteristics of the material supplied.

Shades Card
Jet Black
Ash Grey
Royal Blue
Crest Blue
Navy Blue
Light Walnut
Dark Walnut